The ED Series is a new digital amplifier launched by ENNE which has built-in high-accuracy DSP、built-in router , supporting UDP and network monitoring. Supporting AES3 digital audio and Dante™ digital audio transport(only for models with Dante™),supporting Dante™/Analog automatic backup，supporting both low-z and high-z output.
Features
• 1Unit body, compact, light , stable structure
• 90VAC ~260VAC wide voltage adaptation range
• High-performance audio DSP platform architecture
• Low-Z mode(2 ohms ~16 ohms); High-Z mode(100Vrms/70Vrms)
• High-definition TFT color LCD
• Transport digital audio and monitor/control the amplifier(output voltage 、current 、temperature、protection, etc.）over Cat5e wiring
• Wi-Fi remote monitoring and control via mobile devices
• Unique Back EMF technology collects the returned EMF and combine it with the power correction factor, the technique can charge the capacitors in the amplifier banks and respond to power changes more quickly.
8Ω/stereo :
1000W*4
4Ω/stereo :
1900W*4
2Ω/stereo :
2900W*4
16Ω/Bridged :
2000W*2
8Ω/Bridged :
3800W*2
4Ω/Bridged :
5800W*2
100Vrms :
-
70Vrms :
1700W*4
Maximum input level :
8.7Vrms (+21dBu)(Default Gain)
Default Gain(Rated Power,1 kHz) :
21dB
Gain Range(Rated Power,1 kHz) :
21~39dB
Distortion :
0.05% (10% Rated Power, 1kHz)
Frequency Response :
typical ：±0.5dB (Rated Power,20Hz-1kHz，8Ω）
Input impedance :
20kΩ (Balanced)，10kΩ (Unbalanced)
Damp factor :
1000 (20Hz-200Hz，Lo-Z，8Ω)
Signal to Noise Ratio :
≥105dB (A-weighted)
Required AC Mains :
100-240VAC ±10%，50/60Hz
Protection :
Under-voltage protection 、Output DC protection 、Overheat protection 、Temperature & power control 、Over-load protection
Dimension (WxHxD) :
483x45x376mm
Net Weight :
9kg
Software
APP
.png)
.png)
.png)
