MPS4-2500D
4-Channel Professional Amplifier.
Key Features
• Extra‐large IPS display, capacitive touch panel user interface
• 64 bit double‐precision 96KHz DSP process
• High performance 96KHz/24 bits AD/DA converters
• Powerful and fast response cooling system
• Available versions with Dante ™ Networking ﴾AES67﴿ and AES3 Digital inputs
• Two ports Ethernet switch for daisy chain connection
• USB port for firmware update and DSP control
• High voltage output for high headroom sound
• Similar power per channel in any impedance
• Advanced power management to squeeze until the last watt for your speakers
• Exceptional power sharing in asymetrical loads
Number of channels / Total output power :
@ 8Ω :
3000W x 2
@ 4Ω :
6000W x 2
Frequency Response(± 0.25dB) :
20Hz ‐ 20KHz
Phase Response(@ 1W 20Hz ‐ 20KHz) :
±15deg
Total Harmonic Distortion(20Hz ‐ 20KHz) :
< 0.05%
Intermodulation Distortion :
<0.05%
Damping Factor(20 ‐ 500Hz @ 8Ω) :
>500
Crosstalk(20 Hz-1 kHz) :
>80 dB
Voltage Gain :
32 / 38 / 44dB
Sensitivity(26 / 32 / 38dB Gain) :
3.9 / 1.9 / 1V
S/N Rate(20 Hz-1 kHz) :
116 dB
Power :
Power on Idling(@ 230V) : :
0.5A
1/8 Rated Power @ 4Ω(@ 230 min.Z) :
14A
Operating Voltage(50Hz ‐ 60Hz) :
90V ‐ 265V AC
Dimmensions(H x W x D) :
89 x 483 x 460mm
Weight :
12Kg
Protections :
Soft-start, Turn-on Turn-off transients, Over-heating, DC, RF, Short-circuit,
Open or mismatched loads, ICL™, PMS™, SSP™ and FCM™
* IEC filtered pink noise signal ﴾40Hz ‐ 5KHz, 12dB crest factor﴿. 230V AC mains.
1. PMS can limit output to prevent excessive current draw tripping the mains breaker.
2. SSP can limit output to prevent excessive heating.
Downloads
Software