VM Series

2-Way Dual 8" Full-Range Vertical-Array Loudspeaker


  • Multi-Function Hall
  • Conference Center
  • Theather
  • Transportation
  • Exhibition Rental



VM is short label for “Mini-Vertical”, Mini Vertical-Array Loudspeaker. ENNE VM series is designed for small to mid-size conference hall, theatre, wedding, exhibition and other occasions which in demand of high speech intelligibility, compact and easy to install.


VM208 equips a 1.34” Titanium diaphragm high frequency compression driver. The sound wave outputs through 1” throat isometric waveguide horn. Single cabinet has 100°H x 3°V coverage pattern, the maximum angle between cabinets is 14° (per 2°). Once multiple VM208 combined into a vertical array, vertical coverage can be determined according to the angle between the speaker groups. Although VM208 is not a “real designed” line array loudspeaker, but compared with the traditional point source speaker, VM208 uses isometric waveguide horn and interference between multiple loudspeakers that results sound transmission in nearly plane wave form. If the distance is doubled, Sound pressure attenuation increased nearly 3dB than normal spherical wave.


The mid/low frequency use dual 8” high power ferrite magnet low frequency drivers. There is no parallel surfaces inside the cabinet, it is effectively reducing the low-frequency standing waves.


The cabinet structure employed compact & lightweight design idea. Shell is made of high impact polystyrene (HIPS) plastic material, waterproof, anti-ultraviolet aging, durable. Hence, VM208 is also a best choice of transportation hub or outdoor PA.


Quick and easy installation, VM208-FF Flying-Frame can hoist up to 10 VM208.


Key Feature

  • Vertical-Array Design
  • Light weight, compact size
  • 1.34” Titanium diaphragm high frequency compression driver, 1” exit
  • Dual 8” high power Ferrite magnet low frequency drivers
  • 100°x 3° coverage range, 14° maximum angle between cabinets (per 2°)
  • Similar to isometric coverage



System Type : Dual 8", 2-way, full-range verticak-array loudspeaker
Frequency Range (-10 dB)1 : 62 Hz - 18 kHz
Frequency Response (±3 dB)1 : 70 Hz - 17 kHz
Sensitivity (1w @ 1m) : 96 dB
Nominal Impedance : 8 Ohms
Peak Maximum SPL :

127 dB

Power Rating

300W/ 600W/ 1200W

Crossover Pattern : 100° x 3°
Dimension (H x W x D) : 670  ×285 × 285mm
Net Weight : 15 Kg
LF Driver :

2 x 8", Φ1.37" voice coil

HF Driver :

1 x 1", Φ1.34" voice coil

Input Connectors : 2 x Neutrik® Speakon® NL4MP
Enclosure Construction : High Impact Polystyrene (HIPS)
Flying-Fream : VM208-FF (up to 10 VM208)


1.In half-space.
2. IEC Filtered Pink Noise with 6dB Crest Factor, 2 hours duration.




Dual 12" Vertical Line Array Subwoofer


  • Multi-Function Hall, Conference Hall
  • Small Theater
  • Transportation, Education
  • Exhibition



VM is the short label for Mini-Vertical, which is a mini portable vertical line array loudspeaker series. It can be used into many kinds of places such as small or medium conference hall, small theater, multi-function room, wedding and exhibition. It can deliver high vocal clarity with small size and easy-installation. ENNE VM series is designed to meet such kind of application.


ENNE VM212S is the LF woofer in VM series. It consists of two 12" drivers. The maximum SPL can reach 129dB (peak 135dB). As the woofer supply for VM208, VM212S can provide powerful low frequency dynamic range and sound effect, this can let this group used into most applications. If you require deeper low frequency, you can let VM212S work with 18" subwoofer together to constitute a 4-way system.


VM212S use high quality customized LF driver. 3" voice coil and bass reflex structure. So it can provide a superior low frequency elasticity and fullness.


We recommend one VM212S with four VM208, or two VM212S with eight VM208. The VM208-FF flying frame can maximum carry ten VM208 or the combination of two VM212S with eight VM208.


Key Feature

  • Dual 12" high quality subwoofer
  • Well-designed box structure, can be hanged up with VM208 perfectly

  • Maximum Peak SPL 135dB, which is suitable to meet the use of a variety applications such as small theater, multi-function hall, wedding and exhibition, etc.

  • VM212S use as the woof for VM208. And can work together with 18" subwoofer to a 4-way system

  • Safety and rational hanging accessories for quick installation and use



System Type :

Dual 12" vertical line array subwoofer

Frequency Range (±3 dB)1 : 55 Hz - 1 kHz
Sensitivity (1w @ 1m) : 101 dB
Nominal Impedance : 4 Ohms
Peak Maximum SPL :

129 dB (Peak 135 dB)

Power Rating

700W / 1400W / 2800W

LF Driver : 2 x 12", Φ3" voice coil
Crossover Pattern : 360°
Dimension (H x W x D) : 668  ×545 × 380mm
Net Weight : 46 Kg
Input Connectors : 2 x Neutrik® Speakon® NL4MP
Optional Accessories : VM208-ff


1.In half-space.
2. IEC Filtered Pink Noise with 6dB Crest Factor, 2 hours duration.