ENNE Inc.

ANYLINE Series


AL2

12" Two Way Full Range Line Array Loudspeaker
Applications
  • Theaters, Multi-function Hall, Hall
  • Conference Center, Ballroom
  • Touring
  • Club
  • Fixed installation, Rental
 
Description
As a family member of ANYLINE Series Line Array Loudspeaker, AL2 is a single 12", two way, full range line array loudspeaker. With compact cabinet, high sound level output, AL2 can be easily used into lots of sound reinforcement applications.
 
AL2 has a single 12" low frequency driver with lightweight Neodymium magnet. It has very high output at bass and low range, can bring lots of low frequency energy. Fast and dynamic driver can produce punchy bass. The cone membrane, manufactured by UK, with optimized pulp offering increased strength, durability and performance. Aluminum frame and cooling system can reduce the weight and temperature of the driver, let it handle higher input.
 
The horn of AL2 use planar waveguide design, two high frequency compression driver coupling together to reach to a real flat wave. Therefore, after several cabinets work together as a line array, it can produce an excellent sound field with good coverage and frequency response.
 
The cabinet of AL2 is made with premium birch plywood, coated with wear-resistant paint that minimizes friction damage during touring. The hanging frame is well designed with high safety and reliability. The angle between two cabinets can adjust according to the auditorium coverage from 1°to 15°.
 
ANYLINE Series Line Array Loudspeaker work together with ENNE ANYFIREq series Digital Signal Processor and ANYPOWER series Amplifier with extremely high system compatibility. ANYFIREq DSP processor build in FIR filter, you can get a very flat phase response with FIR Crossover and FIR EQ. In addition, ANYFIREq build in a variety of factory default presets can easily use into lots of kind of PA applications. Whole function DSP processor, include crossover, EQ, delay, phase, gain, etc. the limiter and compressor can protect your loudspeaker system perfectly.
 
Key Feature
  • 2 x 1.5" Titanium High Frequency Compression Driver. Neodymium Magnet.
  • 12" Neodymium Magnet Low Frequency Component.
  • Real Flat Waveguide. 1° ~ 15° Angle Adjustable Between Two Cabinets.
  • 140 dB Peak Maximum SPL. Excellent High Frequency Control Ability.
  • 100° Horizontal Coverage.
  • ENNE ANYPOWER and ANYFIREq Perfect Match.
  • Safety and reliability hanging system.
 
Specifications
Frequency Range (-10 dB)1 : 55 Hz - 19 kHz
Frequency Response (±3dB)1 : 70 Hz - 17 kHz
Sensitivity (1w@1m) : LF: 98 dB / HF: 111 dB
Nominal Impedance : LF: 8 Ohms / HF: 16 Ohms
Maximum SPL :

LF: 125 dB (Peak: 131 dB)
HF: 134 dB (Peak: 140 dB)

Power Rating
(Continuous2/Program/Peak)
:

LF: 500W / 1000W / 2000W
HF: 210W / 420W / 840W

Horizontal Coverage Pattern : 100°
Vertical Coverage Pattern :

Determined based on the number and

angle of the cabinet within the array

Dimension (H x W x D) : 321 mm x 710 mm x 489 mm
Net Weight : 42 Kg
LF Driver : 1 x 12", Φ3" voice coil
HF Driver : 2 x 1.5", Φ2.84" voice coil
Input Connectors : 2 x Neutrik® Speakon® NL4MP
Enclosure Construction : 15 mm, 18 mm Thick plywood
Accessory : AL2-FF

1. In full-space.
2. IEC Filtered Pink Noise with 6dB Crest Factor, 2 hours duration.


AL2-WP

12" Two Way, Full Range Line Array Loudspeaker
Applications
  • Theaters, Multi-function Hall, Hall
  • Conference Center, Ballroom
  • Touring
  • Club
  • Fixed installation, Rental
 
Description
s a family member of ANYLINE Series Line Array Loudspeaker, AL2-WP is a single 12", two way, full range line array loudspeaker. With compact cabinet, high sound level output, AL2-WP can be easily used into lots of sound reinforcement applications.
 
AL2-WP has a single 12" low frequency driver with lightweight Neodymium magnet. It has very high output at bass and low range, can bring lots of low frequency energy. Fast and dynamic driver can produce punchy bass. The cone membrane, manufactured by UK, with optimized pulp offering increased strength, durability and performance. Aluminum frame and cooling system can reduce the weight and temperature of the driver, let it handle higher input.
 
The horn of AL2-WP use planar waveguide design, two high frequency compression driver coupling together to reach to a real flat wave. Therefore, after several cabinets work together as a line array, it can produce an excellent sound field with good coverage and frequency response.
 
The cabinet of AL2-WP is made with premium birch plywood, coated with wear-resistant paint that minimizes friction damage during touring. The hanging frame is well designed with high safety and reliability. The angle between two cabinets can adjust according to the auditorium coverage from 1°to 15°.
 
ANYLINE Series Line Array Loudspeaker work together with ENNE ANYFIREq series Digital Signal Processor and ANYPOWER series Amplifier with extremely high system compatibility. ANYFIREq DSP processor build in FIR filter, you can get a very flat phase response with FIR Crossover and FIR EQ. In addition, ANYFIREq build in a variety of factory default presets can easily use into lots of kind of PA applications. Whole function DSP processor, include crossover, EQ, delay, phase, gain, etc. the limiter and compressor can protect your loudspeaker system perfectly.
 
Key Feature
  • 2 x 1.5" Titanium High Frequency Compression Driver. Neodymium Magnet.
  • 12" Neodymium Magnet Low Frequency Component.
  • Real Flat Waveguide. 1° ~ 15° Angle Adjustable Between Two Cabinets.
  • 140 dB Peak Maximum SPL. Excellent High Frequency Control Ability.
  • 100° Horizontal Coverage.
  • ENNE ANYPOWER and ANYFIREq Perfect Match.
  • Safety and reliability hanging system, Waterproof.
 
Sepcifications
Frequency Range (-10 dB)1 : 55 Hz - 19 kHz
Frequency Response (±3dB)1 : 70 Hz - 17 kHz
Sensitivity (1w@1m) : LF: 98 dB / HF: 111 dB
Nominal Impedance : LF: 8 Ohms / HF: 16 Ohms
Maximum SPL :

LF: 125 dB (Peak: 131 dB)
HF: 134 dB (Peak: 140 dB)

Power Rating
(Continuous2/ Program/Peak) 
:

LF: 500W / 1000W / 2000W
HF: 210W / 420W / 840W

Horizontal Coverage Pattern : 100°
Vertical Coverage Pattern :

Determined based on the number and

angle of the cabinet within the array

Dimension (H x W x D) : 321 mm x 710 mm x 489 mm
Net Weight : 42 Kg
LF Driver : 1 x 12", Φ3" voice coil
HF Driver : 2 x 1.5", Φ2.84" voice coil
Input Connectors : 2 x Aviation socket P-28-4
Enclosure Construction : 15 mm, 18 mm Thick plywood
Accessory : AL2-FF

1. In full-space.
2. IEC Filtered Pink Noise with 6dB Crest Factor, 2 hours duration.

AL210-WP

Dual 10" 2-Way Line Array Element
Applications
  • Theaters, Multi-function Hall
  • Touring
  • Fixed installation, Rental
 
Key Features
  • Super-compact design
  • 90 degrees horizontal coverage, vertical coverage range is determined by both the number and splay angles of the elements
  • New innovative annular diaphragm HF compression driver, brand
  • New ultrashort waveguide
  • Minimum distortion
  • 3 points rigging system
  • Designed for all weather and can be used outdoors
 
Description
AL210-WP uses a brand new ultrashort HF waveguide, dramatically reducing THD, producing a perfect toroidal wave front.
 
The HF compression driver of AL210-WP receives a new neodymium magnetic motor, 104dB system sensitivity, providing 140dB peak SPL, meeting the needs of long distance coverage. Meanwhile,the ring diaphragm makes the high frequency response much more smooth.
 
Symmetrically designed speaker structure:
The woofers use whole horn loading structure to increase the efficiency of mid frequency, making vocal full and solid.
 
AL210-WP’s speaker has V shape design. The acoustic center of HF drivers and woofers coincide, meaning that both LF and HF sources are time aligned, offering the possibility to AL210-WP to be used in passive mode without phase shift at the crossover point to effectively optimize the system cost performance.
 
Moreover, AL210-WP’s are controled by ENNE’s ANYFIREq DSP. ANYFIREq DSP processor has FIR and IIR filters buiding custom factory presets . The best performances are obtained by the use of these presets.
 
AL210-WP is designed for all weather and can be used outdoors.
 
Specifications
Frequency Range (-10 dB)1 : 70 Hz - 18 kHz
Frequency Response (±3dB)1 : 80 Hz - 16 kHz
Sensitivity (1w@1m) : 104 dB
Nominal Impedance : 8 Ohms
Peak Maximum SPL : 140 dB
Power Rating2
(Continuous/Program/Peak)
: 1100W / 2200W / 4400W
Coverage Pattern3 :

Horizontal 90°, Vertical according to configuration

Dimension (H x W x D) : 313 mm x 692 mm x 558 mm
Net Weight : 38 Kg
LF Driver : 2 x 10"
HF Driver : 2 x 2.5"
Input Connectors : 4 x Waterproof connectors
Enclosure Construction : 15 mm Birch plywood
Optional Accessories :

AL210-FF
ALS118-FF
AL210-TB


1. In full-space.
2. IEC Filtered Pink Noise with 6dB Crest Factor, 2 hours duration.
3. 500 Hz to 4 kHz.


ALS8

Single 18", Line Array Subwoofer
Applications
  • Theaters, Multi-function Hall, Hall
  • Conference Center, Ballroom
  • Touring
  • Club
  • Fixed installation, Rental
 
Description

As a family member of ANYLINE Series Line Array Loudspeaker, ALS8 is a single 18" line array subwoofer loudspeaker. With ultra-compact cabinet, high sound level output, unique hanging system, ALS8 can be easily used into lots of sound reinforcement applications with AL2 together.

 

ALS8 has a single 18" sub-low frequency driver with Ceramic magnet, 4" voice coil. The former use glass fiber, reduce the weight and strengthen the strength. The magnet use ceramic, so the low frequency response is very deep and rich. Copper voice coil, can speed up the voice sonic. ALS8 use heavy-duty cast aluminum chassis for increased rigidity and heat sink, very suitable for touring application.

 

The cabinet of ALS8 is well designed and calculated. It use reflex configuration, has very high output and deep response. ALS8 can work with AL2 perfect. Dedicate designed hanging system, allow ALS8 hanging to forward or backward as cardioid system. Besides hanging up, ALS8 and AL2 can also work stack on the ground as a small portable system.

 

ANYLINE Series Line Array Loudspeaker work together with ENNE ANYFIREq series Digital Signal Processor and ANYPOWER series Amplifier with extremely high system compatibility. ANYFIREq DSP processor build in FIR filter, you can get a very flat phase response with FIR Crossover and FIR EQ. In addition, ANYFIREq build in a variety of factory default presets can easily use into lots of kind of PA applications.

 

Whole function DSP processor, include crossover, EQ, delay, phase, gain, etc. the limiter and compressor can protect your loudspeaker system perfectly.

 
Key Feature
  • 18" Ceramic Magnet, 4" Voice Coil.
  • 136dB Peak Maximum SPL. Powerful Sound.
  • Hanging or Stack Ground use together with AL2.
  • Cardioid Configuration.
  • Installation or Touring System.
  • ENNE ANYPOWER and ANYFIREq Perfect Match.
 
Specifications
Frequency Range (-10 dB)1 : 38 Hz - 300 Hz
Frequency Response (±3dB)1 : 46 Hz - 250Hz
Sensitivity (1w@1m) : 100 dB
Nominal Impedance : 8 Ohms
Maximum SPL : 130 dB (Peak: 136 dB)
Power Rating
(Continuous2 / Program/Peak)
: 1000W / 2000W / 4000W
Coverage Pattern : 360° (H x V)
Dimension (H x W x D) : 550 mm x 710 mm x 860 mm
Net Weight : 75 Kg
LF Driver : 1 x 18", Φ4" voice coil
Input Connectors : 2 x Neutrik® Speakon® NL4MP
Enclosure Construction : 18 mm Thick plywood
Accessory : AL2-FF

1. In full-space.
2. IEC Filtered Pink Noise with 6dB Crest Factor, 2 hours duration.

ALS8-WP

Single 18", Line Array Subwoofer
Applications
  • Theaters, Multi-function Hall, Hall
  • Conference Center, Ballroom
  • Touring
  • Club
  • Fixed installation, Rental
 
Description

As a family member of ANYLINE Series Line Array Loudspeaker, ALS8-WP is a single 18" line array subwoofer loudspeaker. With ultra-compact cabinet, high sound level output, unique hanging system, ALS8-WP can be easily used into lots of sound reinforcement applications with AL2-WP together.

&nbsp

ALS8-WP has a single 18" sub-low frequency driver with Ceramic magnet, 4" voice coil. The former use glass fiber, reduce the weight and strengthen the strength. The magnet use ceramic, so the low frequency response is very deep and rich. Copper voice coil, can speed up the voice sonic. ALS8-WP use heavy-duty cast aluminum chassis for increased rigidity and heat sink, very suitable for touring application.

 

The cabinet of ALS8-WP is well designed and calculated. It use reflex configuration, has very high output and deep response. ALS8-WP can work with AL2-WP perfect. Dedicate designed hanging system, allow ALS8-WP hanging to forward or backward as cardioid system. Besides hanging up, ALS8-WP and AL2-WP can also work stack on the ground as a small portable system.

*&nbsp:

ANYLINE Series Line Array Loudspeaker work together with ENNE ANYFIREq series Digital Signal Processor and ANYPOWER series Amplifier with extremely high system compatibility. ANYFIREq DSP processor build in FIR filter, you can get a very flat phase response with FIR Crossover and FIR EQ. In addition, ANYFIREq build in a variety of factory default presets can easily use into lots of kind of PA applications.

&nbsp>

Whole function DSP processor, include crossover, EQ, delay, phase, gain, etc. the limiter and compressor can protect your loudspeaker system perfectly.

 
Specifications
Frequency Range (-10 dB)1 : 38 Hz - 300 Hz
Frequency Response (±3dB)1 : 46 Hz - 250Hz
Sensitivity (1w@1m) : 100 dB
Nominal Impedance : 8 Ohms
Maximum SPL : 130 dB (Peak: 136 dB)
Power Rating
(Continuous2 / Program/Peak)
: 1000W / 2000W / 4000W
Coverage Pattern : 360° (H x V)
Dimension (H x W x D) : 550 mm x 710 mm x 860 mm
Net Weight : 75 Kg
LF Driver : x 18", Φ4" voice coil
Input Connectors : 2 x Aviation socket P-28-4
Enclosure Construction : 18 mm Thick plywood
Accessory : AL2-FF

1. In full-space.
2. IEC Filtered Pink Noise with 6dB Crest Factor, 2 hours duration.

*-WP:Waterproof


ALS118-WP

Single 18", Line Array Subwoofer
Applications
  • Theaters, Multi-function Halls
  • Touring
  • Fixed installation, Rental
 
Description
AL210-WP / ALS118-WP / ALS218-WP are the brand new members of ENNE ANYLINE; AL210-WP, dual 10” full range line array element, ALS118-WP, single 18” line array subwoofer (flown or ground stacked) and ALS218-WP, dual 18” subwoofer (on ground).
 
AL200 series greatly enrich the products line of ANYLINE series, meeting the needs from indoor small-medium sized sound reinforcement system to outdoor medium-large sized sound reinforcement system. ALS118-WP and ALS218-WP are both super compact line array subwoofers, AL210-WP companions. ALS118-WP can be flown or ground stacked. ALS218-WP can be only ground stacked.
 
ALS118-WP and ALS218-WP are both very small cabinets regarding the low frequency extension and high efficiency that they offer. Both front and back panels have Speakon input and link connectors. They can be used in a cardioid arrangement. They compose with AL210-WP a 3 way line array system.
 
ALS118-WP is designed for all weather and can be used outdoors.
 
ANYLINE series line array system work together with ENNE ANYFIREq series Digital Signal Processor and ANYPOWER series amplifiers with extremely high system compatibility. ANYFIREq DSP includes FIR filters, allowing a very flat phase and frequency response with a combination of FIR and IIR filters. In addition, ANYFIREq has a bank of factory presets that can easily be used in lots of different PA applications. Whole function DSP processor, include crossover, EQ, delay, phase, gain, etc. The limiters and compressors protect your loudspeaker system perfectly.
 
Key Features
  • Super-compact design
  • Flown installation and ground stack possibilities Small volume
  • Speakon inputs connectors on both front and back panels to build cardioid array
  • Working with AL210-WP, building up a 3 way line-array system
  • Designed for all weather and can be used outdoors
 
Sepcifications
Frequency Range (-10 dB)1 : 35 Hz - 250 Hz
Frequency Response (±3dB)1 : 40 Hz - 170Hz
Sensitivity (1w@1m) : 97 dB
Nominal Impedance : 8 Ohms
Maximum SPL : 128 dB (Peak: 134 dB)
Power Rating
(Continuous2 / Program/Peak)
: 1500W / 3000W / 6000W
Coverage Pattern : 360° (H x V)
Dimension (H x W x D) : 565 mm x 692 mm x 765 mm
Net Weight : 57.2 Kg
LF Driver : 1 x 18"
Input Connectors ; 4 x Waterproof connectors
Enclosure Construction : 18 mm Birch plywood
Optional Accessories : ALS118-FF

1. In full-space.
2. IEC Filtered Pink Noise with 6dB Crest Factor, 2 hours duration.

ALS218-WP

Double 18", Line Array Subwoofer
Applications
  • Theaters, Multi-function Hall, Hall
  • Touring
  • Fixed installation, Rental
 
Discription
As a family member of ANYLINE Series Line Array, ALS218-WP is a double 18" subwoofer. With ultra-high output sound pressure level, ALS218-WP can be used in large applications and high demand systems.
 
ALS218-WP has double 18" low frequency drivers with Ceramic magnet. The drivers use double Silicone suspension for perfect mechanical control. Heavy-duty cast aluminum chassis, can increase rigidity and heat sink, very suitable for touring application. High quality copper voice coil, reduce thermal compression. Therefore, when the application needs high permanent power subwoofer, ALS218-WP can ensure a consistent low frequency output.
 
ALS218-WP’s drivers are loaded by a double interactive chamber, for very high output and deep response. Therefore, ALS218-WP has deeper, lower response than similar size subwoofers and warm tonal sound.Both front and back panels have Speakon input and link connectors. They can be used in a cardioid arrangement.
 
ALS218-WP is designed for all weather and can be used outdoors.
 
ANYLINE series line array system work together with ENNE ANYFIREq series Digital Signal Processor and ANYPOWER series amplifiers with extremely high system compatibility. ANYFIREq DSP includes FIR filters, allowing a very flat phase and frequency response with a combination of FIR and IIR filters.The limiters and compressors protect your loudspeaker system perfectly.
 
Key Features
  • 2 x 18" Ceramic Magnet.
  • 141 dB Peak Maximum SPL. Warm Tonal Sound.
  • Deeper Low Response. Higher Output.
  • Cardioid Configuration.
  • Installation or Touring System.
  • ENNE ANYPOWER and ANYFIREq Perfect Match.
  • Designed for all weather and can be used outdoors.
 
Specifications
Frequency Range (-10 dB)1 : 32 Hz - 250 Hz
Frequency Response (±3dB)1 : 40 Hz - 170Hz
Sensitivity (1w@1m) : 101 dB
Nominal Impedance : 4 Ohms
Maximum SPL : 135 dB (Peak: 141 dB)
Power Rating
(Continuous2 / Program/Peak)
: 3000W / 6000W / 12000W
Coverage Pattern : 360° (H x V)
Dimension (H x W x D) ; 580 mm x 990 mm x 790 mm
Net Weight ; 95 Kg
LF Driver : 2 x 18"
Input Connectors : 4 x Waterproof connectors
Enclosure Construction : 18 mm Birch plywood

1. In full-space.
2. IEC Filtered Pink Noise with 6dB Crest Factor, 2 hours duration.