ENNE Inc.

ANYPOWER Series



  • High-quality TD class amplifier circuit
  • Well-designed filter electrolytic capacitor, high-fidelity sound reproduction
  • Super high-quality copper radiator to enhance the stability of the power amplifier

  • High-quality regulated power supply, 190V ~ 260V wide range

  • Support 2 ohm low resistance state

  • Front panel design, durability and aesthetics coexist

 

Specifications:

Series

:

ANYPOWER 2

ANYPOWER 4

Number of channels

:

2CH

4CH

8Ω Stereo1

2 x 2200W

4 x 1500W

4Ω Stereo2

:

2 x 4000W

4 x 2800W

2Ω Stereo2

:

2 x 5000W

4 x 3200W

8Ω Bridged Power2

:

8000W

2 x 5000W

4Ω Bridged Power2

:

10000W

2 x 6500W

Frequency Response

:

20 Hz ‐ 20 KHz, ±0.5 dB

20 Hz ‐ 20 KHz, ±0.5 dB

Total Harmonic Distortion

:

< 0.1%,20Hz ‐ 20kHz@1W

< 0.1%,20Hz ‐ 20kHz@1W

Input Sensitivity

:

23dB/26dB/29dB/32dB/35dB/38dB/

41dB/44dB

23dB/26dB/29dB/32dB/35dB/38dB/

41dB/44dB

Conversion Rate

:

50V/us

40V/us

Damping(100Hz)

:

>800:1

>600:1

SNR

:

12dBA

112dBA

Separation

:

>80 dB

>80 dB

CMRR(1kHz) : 51 dB 59 dB

Bridge Mode

:

CH 1+CH 2

CH 1+ CH 2 or CH 3+CH 4 bridge

Input Impedance : 20kΩ balance / 10kΩ unbalance 20kΩ balance / 10kΩ unbalance
N.W./G.W : 17kg / 19kg 21kg / 23kg
Signal Input : Balanced input XLR female socket Balanced input XLR female socket
Cascade Output : Balanced and connected to XLR male
 socket
Balanced and connected to the
Phoenix socket
Speaker Output : NL4 Speakon socket NL4 Speakon socket
Protection :

Soft Start. VHF. Direct‐current. Short. Overload. Distortion limiter. Overheat. Intelligent clipping protection, output zero current switch

Soft Start. VHF. Direct‐current. Short. Overload. Distortion limiter. Overheat. Intelligent clipping protection, output zero current switch

LCD Panel : Signal, peak clipping, protection, power indication Signal, peak clipping, protection, power indication
Dimensions 483 x 462 x 89 mm 483 x 462 x 89 mm
Power Requirements : 220V‐ 240V/50 ‐ 60Hz 220V‐ 240V/50 ‐ 60Hz

 

* The power is in accordance with the EIA standard

* The power use a 40ms pulse 1 kHz sinewave measured at 1% total harmonic distortion